Homepage    POE switch    GLS1118P


● 16*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply)
● 2*1000M RJ45 
● Backplane Bandwidth:36Gbps
● Packet Forwarding Rate:26.78Mbps
● Support one-key Switch, VLAN, Extend

Product Description

GLS1118P is a 16-port Gigabit PoE switch independently developed by Kedi Communication, which provides 16* 10/100/1000M adaptive RJ45 ports. 2 Gigabit RJ45 ports, each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions. Support IEEE802.3af/at standard PoE power supply function, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable.

The device is plug-and-play, no configuration is required, and it is simple and convenient to use. It can be used in the access layer of security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprises.



Product model and appearance


 16*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply)

 2*1000M RJ45 

● Backplane Bandwidth:36Gbps

● Packet Forwarding Rate:26.78Mbps

● Support one-key Switch, VLAN, Extend




Large buffer design, high-definition video does not freeze

● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow

● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions



Operating mode

Provide two swap modes.

● Standard mode: All ports can be freely communicated after turning on. Applicable to ordinary data transmission environments

● VLAN mode: After opening, all downstream ports cannot communicate with each other, which can isolate broadcast storms and prevent ARP viruses

● EXTEND mode: After opening, the downstream 1-8 port rate becomes 10m, the transmission distance is up to 250m



PoE Power Supply Capability

 Support IEEE 802.3af/at PoE power supply standard

● The maximum output power of a single port can reach 30W

● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;

● Automatic detection and identification of standard PoE power receiving equipment, intelligent power supply, will not burn non-standard PoE power receiving equipment or ordinary equipment

● The PoE port supports a priority mechanism, when the remaining power is insufficient, the power supply of the high-priority port is guaranteed first



Product Reliability

 The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.

● High redundancy design, providing long-term stable PoE power output.

● 0~45℃ working temperature improves product stability in a wide temperature environment



Easy To Use

 Plug and play, no need to configure, simple and convenient

● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act), and digital tube power display



Physical Characteristics



Downlink Ports

16*10/100/1000M RJ45 ports

Uplink Port

2*1000M RJ45

PoE Standard Power Supply

IEEE 802.3at、IEEE 802.3af

Total Power Supply


LED Indicator

PWR,Link / Act

Transmission Mode

IEEE802.3 full duplex flow control and backpressure half duplex flow control

Backplane Bandwidth


Packet Forwarding Rate


MAC Address


Standard Protocol

IEEE802.3i 10 BASE-T

IEEE802.3u 100 BASE-TX

IEEE802.3ab 1000 BASE-T

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet

IEEE802.3x Flow Control

IEEE802.3az EEE

Power Supply

AC 100~240V 50/60HZ


270mm ×181mm × 44mm

Environmental Specification

Working Temperature: 0℃~45℃, Humidity: 10% ~ 90%

Storage Temperature: - 2070,  Humidity: 5% ~ 95%




ordering information

Product Description


16*10/100/1000M Auto-negotiation RJ45 port + 2*1000M Uplink

related products