Homepage    POE switch    CGS1110P

CGS1110P

● 8*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply)
● 2*1000M RJ45 Uplink Ports
● Backplane Bandwidth:20Gbps
● Packet Forwarding Rate:14.88Mpps
● Support smart PoE power supply
● Support one-key Switch, VLAN, Extend

Product Description

CGS1110P is an 8-port Gigabit PoE switch developed by ACORID, providing 8*10/100/1000M adaptive RJ45 ports and 2 Gigabit RJ45 Uplink ports. Each RJ45 port supports MDI/MDIX auto-flip and wire-speed forwarding functions. All downlink ports support PoE+ power supply, with single port PoE power up to 30W and maximum PoE output power of 96W. As a PoE powered device, it can automatically detect and identify the standard powered devices and supply power to them through the network cable.

The device is plug-and-play, no configuration, simple and convenient to use, and is the best choice for wireless coverage of security monitoring in hotels, campuses, factory dormitories, and small and medium-sized enterprises.

 

 

Product model and appearance

               CGS1110P

 8*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply)

 2*1000M RJ45 Uplink Ports

● Backplane Bandwidth:20Gbps

● Packet Forwarding Rate:14.88Mpps

● Support smart PoE power supply

● Support one-key Switch, VLAN, Extend

 

Features

Large buffer design, high-definition video does not freeze

● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow

● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions

 

Operating Mode

 Provides three exchange modes.

 Standard mode: All ports can communicate freely after opening. Suitable for ordinary data transmission environment

● VLAN mode: After opening, all downstream ports cannot communicate with each other, which can isolate broadcast storms and prevent ARP viruses

● Extend mode: After opening, the rate of all downlink ports becomes 10M, and the transmission distance can reach 250m.

 

PoE Power Supply Capability

● The maximum output power of a single port can reach 30W

● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;

 

Product Reliability

 The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.

● High redundancy design, providing long-term stable PoE power output.

● 0~45℃ working temperature improves product stability in a wide temperature environment

 

Easy To Use

 Plug and play, no need to configure, simple and convenient

● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act)

 

Physical Characteristics

Model

CGS1110P

Downlink Ports

8*10/100/1000M RJ45 ports

Uplink ports

2*1000M RJ45 Uplink Ports

Total Power Supply

96W

LED Indicator

PowerLink / Act

Transmission Mode

IEEE802.3 full duplex flow control and backpressure half duplex flow control

Backplane Bandwidth

20Gbps

Packet Forwarding Rate

14.88Mpps

MAC Address

2K

Standard Protocol

IEEE802.3i 10 BASE-T

IEEE802.3u 100 BASE-TX

IEEE802.3ab 1000 BASE-T

IEEE802.3x Flow Control

IEEE802.3az EEE

Power Supply

AC 100~240V 50/60HZ

Size

200mm × 133mm × 44mm

Environmental Specification

Working Temperature: 0℃~45℃, Humidity: 10% ~ 90%

Storage Temperature: - 2070,  Humidity: 5% ~ 95%

 

ordering information

Product Description

CGS1110P

8*10/100/1000M RJ45 ports+2*1000M RJ45 Uplink Ports

related products