CS1106P
● 2*100M RJ45 Uplink ports
● Backplane Bandwidth:1.2Gbps
● Packet Forwarding Rate:0.89Mpps
● Support one-key Switch, Extend
Product Description
The CS1106P is a self-developed 6-port 100Gb PoE switch that provides six 10/100M adaptive RJ45 ports. Each RJ45 port supports MDI/MDIX auto-flip and wire-speed forwarding functions. It can automatically detect and identify the standard-compliant powered devices and supply power to them through the network cable.
The device is plug-and-play, no configuration required, easy and convenient to use. Can be used in security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprise networking access layer.
Product model and appearance
|
● 4*10/100M RJ45 Adaptive RJ45 ports ● 2*100M RJ45 Uplink ports ● Backplane Bandwidth:1.2Gbps ● Packet Forwarding Rate:0.89Mpps ● Support one-key Switch, Extend |
Features
● Large buffer design, high-definition video does not freeze
● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow
● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
Operating Mode
● Provides three exchange modes.
● Standard mode: All ports can communicate freely after opening. Suitable for ordinary data transmission environment
● Extend mode: After opening, the rate of all downlink ports becomes 10M, and the transmission distance can reach 250m.
PoE Power Supply Capability
● The maximum output power of a single port can reach 30W
● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;
Product Reliability
● The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.
● High redundancy design, providing long-term stable PoE power output.
● 0~45℃ working temperature improves product stability in a wide temperature environment
Easy To Use
● Plug and play, no need to configure, simple and convenient
● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act)
Physical Characteristics
Model |
CS1106P |
Downlink Ports |
4*10/100M RJ45 ports |
Uplink ports |
2*100M RJ45 Uplink ports |
Total Power Supply |
65W |
LED Indicator |
Link / Act |
Transmission Mode |
IEEE802.3 full duplex flow control and backpressure half duplex flow control |
Backplane Bandwidth |
1.2Gbps |
Packet Forwarding Rate |
0.89Mpps |
MAC Address |
2K |
Standard Protocol |
IEEE802.3i 10 BASE-T IEEE802.3u 100 BASE-TX IEEE802.3x Flow Control IEEE802.3az EEE |
Power Supply |
AC 200~240V 50/60HZ |
Size |
200mm × 133mm × 44mm |
Environmental Specification |
Working Temperature: 0℃~45℃, Humidity: 10% ~ 90% Storage Temperature: - 20℃~70℃, Humidity: 5% ~ 95% |
ordering information
Product Description
CS1106P |
4*10/100M Auto-negotiation RJ45 ports + 2*100M RJ45 Uplink ports |