Homepage    POE switch    GLS1726PF-250W


* 24x 10/100/1000Mbps PoE+RJ45 ports Auto Negotiation/Auto MDI/MDIX
* 2× Gigabit SFP Ports
* PoE standard: IEEE 802.3af/at
* PoE power: Up to 30W (Port 1 ~ Port 16)
* PoE budget: 250W
* Switch / VLAN / Extend working mode support
* Data transmission up to 250m with Extend supported
* Power Digital display supported
* Rack Mountable (19 inch)

Product Description

GLS1726PF is a 24-port Gigabit digital PoE switch independently developed by Kedi Communication, providing 24 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber ports. Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions. The downstream ports all support the IEEE802.3af/at standard PoE power supply function, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable.

Prevents usage overload, the device is plug-and-play, no configuration is required, and easy to use. It can be used in the access layer of security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprises.


Product model and appearance







 24*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply)

 2*1000M RJ45 ports (23,24 ports) + 2*1000M SFP fiber ports

● Backplane Bandwidth:52Gbps

● Packet Forwarding Rate:38.69Mpps

● Support smart PoE power supply and PoE power digital tube display



Large buffer design, high-definition video does not freeze

● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow

● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions


PoE Power Supply Capability

 Support IEEE 802.3af/at PoE power supply standard

● The maximum output power of a single port can reach 30W

● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;

● Automatic detection and identification of standard PoE power receiving equipment, intelligent power supply, will not burn non-standard PoE power receiving equipment or ordinary equipment

● The PoE port supports a priority mechanism, when the remaining power is insufficient, the power supply of the high-priority port is guaranteed first


Product Reliability

 The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.

● High redundancy design, providing long-term stable PoE power output.

● 0~45℃ working temperature improves product stability in a wide temperature environment


Easy To Use

 Plug and play, no need to configure, simple and convenient

● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act), and digital tube power display


Physical Characteristics



Downlink Ports

24*10/100/1000M RJ45 ports

Uplink ports

2*1000M RJ45 ports (23,24 ports) + 2*1000M SFP fiber ports

PoE Standard Power Supply

IEEE 802.3at、IEEE 802.3af

Total Power Supply


LED Indicator

Link / Act

Transmission Mode

IEEE802.3 full duplex flow control and backpressure half duplex flow control

Backplane Bandwidth


Packet Forwarding Rate


MAC Address


Standard Protocol

IEEE802.3i 10 BASE-T

IEEE802.3u 100 BASE-TX

IEEE802.3ab 1000 BASE-T

IEEE802.3x Flow Control

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet

IEEE802.3az EEE

Power Supply

AC 200~240V 50/60HZ


440mm × 220mm × 44mm

Environmental Specification

Working Temperature: 0℃~45℃, Humidity: 10% ~ 90%

Storage Temperature: - 2070,  Humidity: 5% ~ 95%




ordering information

Product Description


24*10/100/1000M RJ45 ports+ 2 *1000M SFP fiber ports


Product manual download

related products