CS1118P
● 2*1000M RJ45 Uplink Ports
● Backplane Bandwidth：7.2Gbps
● Packet Forwarding Rate：5.36Mpps
● Support smart PoE power supply
● Support one-key Switch, VLAN, Extend
Product Description
The CS1118P is a gigabit uplink 16-port 100M PoE switch developed by acorid Communications, providing 16* 10/100M adaptive RJ45 ports and 2*1000M RJ45 Uplink ports. Each RJ45 port supports MDI/MDIX auto-flip and wire-speed forwarding functions. All downlink ports support PoE+ power supply, with single port PoE power up to 30W and maximum PoE output power of 150W. As a PoE powered device, it can automatically detect and identify the standard powered devices and supply power to them through the network cable.
The device is plug-and-play, no configuration, simple and convenient to use, and is the best choice for wireless coverage of security monitoring in hotels, campuses, factory dormitories, and small and medium-sized enterprises.
Product model and appearance
|
CS1118P |
● 16*10/100M RJ45 Adaptive RJ45 port (PoE power supply) ● 2*1000M RJ45 Uplink Ports ● Backplane Bandwidth：7.2Gbps ● Packet Forwarding Rate：5.36Mpps ● Support smart PoE power supply ● Support one-key Switch, VLAN, Extend |
Features
● Large buffer design, high-definition video does not freeze
● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow
● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
Operating Mode
● Provides three exchange modes.
● Standard mode: All ports can communicate freely after opening. Suitable for ordinary data transmission environment
● VLAN mode: After opening, all downstream ports cannot communicate with each other, which can isolate broadcast storms and prevent ARP viruses
● Extend mode: After opening, the rate of all downlink ports becomes 10M, and the transmission distance can reach 250m.
PoE Power Supply Capability
● The maximum output power of a single port can reach 30W
● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;
Product Reliability
● The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.
● High redundancy design, providing long-term stable PoE power output.
● 0~45℃ working temperature improves product stability in a wide temperature environment
Easy To Use
● Plug and play, no need to configure, simple and convenient
● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act)
Physical Characteristics
|
Model |
CS1118P |
|
Downlink Ports |
16*10/100M RJ45 ports |
|
Uplink ports |
2*1000M RJ45 Uplink Ports |
|
Total Power Supply |
150W |
|
LED Indicator |
Power、Link / Act |
|
Transmission Mode |
IEEE802.3 full duplex flow control and backpressure half duplex flow control |
|
Backplane Bandwidth |
7.2Gbps |
|
Packet Forwarding Rate |
5.36Mpps |
|
MAC Address |
4K |
|
Standard Protocol |
IEEE802.3i 10 BASE-T IEEE802.3u 100 BASE-TX IEEE802.3ab 1000 BASE-T IEEE802.3x Flow Control IEEE802.3az EEE |
|
Power Supply |
AC 200~240V 50/60HZ |
|
Size |
270mm ×181mm × 44mm |
|
Environmental Specification |
Working Temperature: 0℃～45℃， Humidity: 10% ~ 90% Storage Temperature: - 20℃～70℃, Humidity: 5% ~ 95% |
ordering information
Product Description
|
CS1118P |
16*10/100M RJ45 ports+2*1000M RJ45 Uplink Ports |
