Homepage    POE switch    LS5306P

LS5306P

* 4x 10/100Mbps PoE+RJ45 ports Auto Negotiation/Auto MDI/MDIX
* 2x 10/100Mbps non PoE+RJ45 ports Auto Negotiation/Auto MDI/MDIX
* PoE standard: IEEE 802.3af/at
* PoE power: Up to 30W (Port 1 ~ Port 4)
* PoE budget: 65W
* Switch / VLAN / Extend working mode support
* Data transmission up to 250m with Extend supported
* Power Digital display supported

Product Description

LS5306P is a 6-port 100M digital PoE switch independently developed by Kedi Communication, providing 6 10/100M adaptive RJ45 ports. 2*100M RJ45 Uplink portsEach RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions. The downstream ports all support the IEEE802.3af/at standard PoE power supply function, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable.

The device supports digital display of power to prevent overload of usage. The device is plug and play, no configuration is required, and it is simple and convenient to use. It can be used in the access layer of security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprises.

 

Features

Large buffer design, high-definition video does not freeze

● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow

● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions

 

Operating Mode

 Provides three exchange modes.

 Standard mode: All ports can communicate freely after opening. Suitable for ordinary data transmission environment

● VLAN mode: After opening, all downstream ports cannot communicate with each other, which can isolate broadcast storms and prevent ARP viruses

● Extend mode: After opening, the rate of all downlink ports becomes 10M, and the transmission distance can reach 250m.

 

PoE Power Supply Capability

 Support IEEE 802.3af/at PoE power supply standard

● The maximum output power of a single port can reach 30W

● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;

● Automatic detection and identification of standard PoE power receiving equipment, intelligent power supply, will not burn non-standard PoE power receiving equipment or ordinary equipment

● The PoE port supports a priority mechanism, when the remaining power is insufficient, the power supply of the high-priority port is guaranteed first

 

Product Reliability

 The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.

● High redundancy design, providing long-term stable PoE power output.

● 0~45℃ working temperature improves product stability in a wide temperature environment

 

Easy To Use

 Plug and play, no need to configure, simple and convenient

● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act), and digital tube power display

 

 

Physical Characteristics

Model

LS5306P

Downlink Ports

4*10/100M RJ45 ports

Uplink ports

2*100M RJ45 Uplink ports

PoE Standard Power Supply

IEEE 802.3at、IEEE 802.3af

Total Power Supply

65W

LED Indicator

Link / Act

Transmission Mode

IEEE802.3 full duplex flow control and backpressure half duplex flow control

Backplane Bandwidth

1.2Gbps

Packet Forwarding Rate

0.89Mpps

MAC Address

2K

Standard Protocol

IEEE802.3i 10 BASE-T

IEEE802.3u 100 BASE-TX

IEEE802.3x Flow Control

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet

IEEE802.3az EEE

Power Supply

AC 100~240V 50/60HZ

Size

200mm × 133mm × 44mm

Environmental Specification

Working Temperature: 0℃~45℃, Humidity: 10% ~ 90%

Storage Temperature: - 2070,  Humidity: 5% ~ 95%

 

 

 

ordering information

Product Description

LS5306P

4*10/100M Auto-negotiation RJ45 ports + 2*100M RJ45 Uplink ports

 

product manual download

related products